It’s one of those items you can do yourself, or you can get a builder to do it for you.

Here’s how to do that.

Flat Roof Basics and ConstructionFirst, it’s important to know the basic elements of building a flat roof.

A flat roof is a two-sided structure, so it’s usually rectangular, and the front faces up.

In this case, that means the roof sits above the house.

Flats are generally made of one or more layers of materials that are either galvanized steel or wood.

The front face is the front facing of the roof.

The roof usually has a top face, or face, that’s a solid block of steel or other material.

When it’s raised up to the sky, it may have a “thick” roof, or a “thin” roof.

A flat roof’s front face has the most horizontal clearance.

It’s where the roof will sit on the ground and protect the ground from wind and rain.

Flates can also have a back face, which is where the front face will face the ground, usually with a sloping top face.

A roof can have an open back face because the roof can be lifted out of the ground.

A back face is also called a “cave.”

Flats can also be two-level, with one level being a horizontal floor and the other a vertical floor.

Vertical or horizontal flat roofs are generally a lot cheaper to build than horizontal ones.

A roof can also come with a number of options.

There are flat roofs with slats on the sides, a slat-free roof, a flat-sided roof, and more.

Flattened roofs can be a lot easier to install and maintain.

The slats prevent the roof from being tilted when it’s lifted off the ground when it gets wet, which means it’s not exposed to the elements.

A slat is a decorative piece of material on the roof that has a smooth, square shape.

This design lets the roof look like it’s going up, and then it goes down again.

A sliding roof, on the other hand, requires that you install a sliding plate over the roof’s edge, which makes the roof tilt in a certain direction.

The plates have a number on them that indicates how far the roof has to go before it gets to the next level.

The roof usually comes with a roofer, who can adjust the slats, the slatted edges, and how high the roof is when it needs to be lowered.

A good roofer will know what to look for in a flat and will also know the roof materials that fit a roof.

When a flat is complete, it is typically painted, and is usually built with the roofer as the architect.

If the roofing contractor is not available, you may want to consider a roofing company that does roofing.

A Flat is a roof that sits on a solid foundation and protects the house from rain, wind, and other elements.

You might not need to go to a roof-building company, but you might want to have someone that does.